i use the truck the 750 bought the most expensice engine parts put huge drag racing tires on it left one seat no hood to body parts and i go about 375 with 4 nos tanks

Put the gtle motor in it and tune it. I have 677hp along with 4 nitrous tanks. On the test track I run a 7.1 in the 1/4mile. And only 18sec for 1mile.

I also use the truck... But first of all buy a MC GT, then get the manifolds and twin
turbo kit. Now go but a 750 and do a engen swap. Dont forget to tune block to max RPM. On
the test track I run 6.8 but in a race its more like 7.8

Yes true... buy a standart 750 don't do any thing to it just put a LAMA racing engine
with 2000hp i made it up to 467km/h but it could go faster just need the space to do
so :)

Prime DHL 500 = 830HP 612KW

I use the Lama Racing Block, crank, con rods, pistons, cylinder heads and covers,
camshafts, gearbox, clutch, flywheel and oilpan. Then I use the standard intake system,
connected to the racing super charger, allongside with the standard exhaust headers and
racing carbeurators. All the cams must be tuned to -15deg and compression ratio to 20.0:1.
If done correctly the motor should put out +/- 4500hp. And tune the gearbox to a very low
gear ratio, and the drive distribution to 25/75. I did a 1/4 mile in 6.8 secs and 1 mile
14.8.

mustang built = 7700hp an i never hit the top speed

@furrano gts
I use the lama racing block, crank, con rods, pistons, cylinder heads and covers,
Camshafts, gearbox, clutch, flywheel and oilpan. Then i use the standard intake system,
Connected to the racing super charger, allongside with the standard exhaust headers and
Racing carbeurators. All the cams must be tuned to -15deg and compression ratio to
20.0:1.
If done correctly the motor should put out +/- 4500hp. And tune the gearbox to a very low
Gear ratio, and the drive distribution to 25/75. I did a 1/4 mile in 6.8 secs and 1 mile
14.8.

Can you help me? I know this is really old xd but when ever i try to go race, it says the
static compression is too low :c i did it just how you said. Can you help?